Wednesday, September 12, 2012

Super Hero Bed




"Dad's" note: Every kid wants to be a super hero so why not make this fun easy bed with a hidden fort underneath ? The slide made out of melamine makes a quick get away when your super hero is fighting crime.  Extremely sturdy to hold as many heros as you can fit on the bed, this is a must have!  Background Super Hero painting done on a $21 hollow core door by my wife (check out her creativity at gramma allie etsy shop).  Inspired by Michael B. Myers Jr. posters.

Material List                           Cost $150.00
7 – 2” x 4” 8 foot long
2 sheets of ¾” MDF (Medium Density Fiberboard)
1 sheet of ½” plywood
1 – 2” x 6” 8 foot long
1 – 2” x 8” 8 foot long
1 tube of PL Premium (Loctite)
Caulk gun
6 – 4” lag screws 5/16” in diameter and washers
1 piece of melamine shelving 8 foot long
one small box of 16 penny nails or 3” deck screws
Note:  I used a router to round all of the edges and sanded everything before securing it.


We start by making the bed frame with 2 x 4’s.  Note the drawing and dimensions.  Also note that the one sheet of ½” plywood is cut to the outside dimensions of the completed frame. I like to install the bedframe to the wall then attach the plywood to the installed frame.  It is easier to secure the frame to the wall with the lag screws before the top goes on.  Make sure you locate the studs in the wall, predrill the holes  and then lag screw the frame to the studs.  Refer to my post on the “Living Room shelf” for stud locating tips.  Refer to the same post for selecting the correct size drill.  Cutting a 2” x 4” to a length of 2’ 2 ¾” will act as a perfect leg to help hold the bedframe in position while you secure the bed frame to the wall.


The cut piece of plywood can now be glued and nailed or screwed to the bedframe.  Be careful not get any glue on the carpet or you may not be considered a “Super Hero”!


Use a piece of ¾” MDF for the front of the bed.  Note that it does not go under the slide.  This allows for a secret entrance to the cave under the bed.  I rounded the corner at the top to make it a little more user friendly for your super hero’s.  I know they’re tough but why test them.  You can now cut the two stringers for the slide.  We will use two 2” x 4” for this purpose.  You can get the correct angle to cut the 2” x 4” at by putting the 2” x 4” on the bed frame and marking the angle created by the front section of MDF.  After you have cut both slide stringers attach them to a piece of 2” x 8” that has been cut to a length of 16” (the finished slide width will be about 16”).  The two stringers attached to the 2” x 8” will attach to the side of the bed to anchor the stringers for the slide.


Next cut the melamine shelf material to the correct length for your slide.  We will use ¾” MDF to create the sides to our slide.  You can glue it in place and screw if from the undersurface (make certain the screw length is correct or you will come out through the top of the slide surface.  You can opt to glue it in place and screw it from the top if you countersink the screw heads (the screw heads will be way over on the side of the slide and not cause a problem for your Super Heroes).


The landing for the staircase is next.  It is made up of three 2 x 4’s and one 2 x 6 note the dimensions and make your cuts.  It can be put together with deck screws or 16 penny nails.  The landing is screwed to the bedframe and lag screwed to the wall (hit a stud).  A piece of ¾” MDF should be cut to create the deck of the landing.  Don’t attach it just yet.  It is nice to have a little space when you want to secure the stairs to the landing.


Cut a 2 x 6 to a length of 3 feet 1 ¼ inches long.  Take that board and mark an angle of approximately 54 degrees (the bottom angle) and approximately 36 degrees (the top angle).  This will create a stringer for one side of your stairs.  Check the length of the board and the accuracy of your angles by placing the 2 x 6 against the top of the landing.  If all has worked out well create a second stringer for the other side of the staircase.  You can precut your stair treads to a length of 13” in length.  You will need 4 treads at this length.  Take a stringer and again place it against the landing.  With a level mark 4 equally distanced lines that will serve as your guide for nailing the stair treads to the stringers.  The first line for the first stair should be 6 3/16 inches off the floor.  This line represents the top of the first stair.  Repeat the process for each stair tread, the top of the next should be 6 3/16 inches up from the last tread.  (Note when you put the ¾ inch MDF on the top of the landing it will match up with the height of each step on the staircase.)  Now repeat the process with the other stringer, marking the height of each stair tread that will make up your staircase. 


Nail that puppy together and secure it to the top of the landing ( again it should stick up about ¾ of an inch to match up with the deck we will place on the landing).  You can get fancy and use hangers to attach the stairs (found at your local lumber company) or you can nail them in place against the 2 x 6 of the landing.  Now is the time to secure the MDF landing board.

The remaining item to cut out is the side panel of MDF that covers the staircase and is the entrance to the “secret cave”.  Refer to the drawing below.


 Enjoy painting your Super Hero bed.  City scenes can be found by googling city skyline pictures if you want some creative help.

16 comments:

  1. I want to scream at the top of my lungs!!! That is how excited I am that you've started a blog!! I have been waiting and WAITING for a tutorial on this bed since Cheri posted about it! Oh my goodness Breck, you are so talented and crafty :) I am waiting on pins and needles to see what else you create (and share with us all)!!! Whatever you do with your blog, I know it's going to be AMAZING!!! SO. EXCITED.

    ReplyDelete
  2. This is great! Silly question... what size mattress does this fit? We're thinking of moving our 4yo out of her toddler bed and into a big girl bed. Since her room is so small this would be a great way to find some more play space.

    Thank you so much for posting these plans. I've loved this from the moment I saw it on iammommahearmeroar!!!

    ReplyDelete
  3. This is a plan for a twin bed. She will love the "secret hideout" underneath!

    ReplyDelete
    Replies
    1. Yes! I am so glad you posted this- we have a superhero themed room and LOVE LOVE this bed! Thanks for sharing!

      Delete
  4. Can you tell me wht colors you used on the wall and bed???

    ReplyDelete
  5. I am SO excited to make this bed for my son's new superhero themed room. A few of the pictures seem to have broken links. Do you have copies of those pictures too? This is so awesome and you are awesome for sharing it!

    ReplyDelete
  6. Nevermind, I just refreshed and now they all worked. Sorry about that!

    ReplyDelete
  7. Sorry for all the comments--is there anything holding the bed up besides it being screwed into the wall studs? I'm obviously no engineer, so I just wanted to double check that's all that was needed for this to be secure enough to hold the weight of the mattress/kid(s). Thanks again!

    ReplyDelete
  8. ohh i just saw your blog. feeling great to see such kind of outstanding stuff. i like the way you are working on this blog.
    Suppliers of beds and mattresses

    ReplyDelete
  9. Wow, this is amazing. I'm going to do this for my son. I have a question...can I use your specs and go to home depot and have them cut it to your specified lengths?

    ReplyDelete
  10. Several Murphy Bedrooms with a piston mechanism use a secure during their own arrangement to ensure that this wall structure cargo area will be low the right way. These types of hair additionally safeguarded this Murphy Bed within the showcase when not being used. murphy bed programs of which employ piston mechanism encounter a new lower chance of fatigue as well as sagging, that significantly stretches this extended life from the product or service.

    ReplyDelete
  11. There are several inconsistencies with the pictures and plans. For example the finished pictures show 5 steps, plans only for 4. Also the stair landing shows a 2x6 for the attachment plate, but in a different picture it shows a 2x4.

    The main 3/4" MDF panel is not supposed to go under the slide, but in one of the drawings it is shown going under the 2x8 as well, and a random piece to top off the Melamine board.

    I assume the steps are made of 2x8 pieces, as that is the only left over material if going by the build material list shown at the top, but no where are the steps shown or written to be used of a certain material.

    could you clarify a lot of this?

    ReplyDelete
  12. I agree on the clearification along with attaching the side pieces to the slide and the rest of the bed surround.

    But what is MOST important is the fact the the painting has captain America... He is a marvel character and the rest are DC.... Does anyone else see a problem with this?

    ReplyDelete
  13. Do you have the length measurements for the slide stringers? If you have a cut list for all it would be amazingly helpful! Thanks in advance!

    ReplyDelete
  14. 2 days ago, I told about about Jim's WoodProfit course.

    ==> Over 16,000 Woodworking Plans

    I've spoken on the phone with Jim Morgan and I'm just
    blown away by his simple and effective strategy to
    make money using his basic woodworking skills.

    He started his woodworking business with NO capital,
    a few shop tools, and a lot of nerve, in a small
    10x20 foot space and grew it into a 1,400 space in
    the first few months while still remaining as a
    one-person business!

    See his story at: ==> All the woodworking tools you will need

    Now if you want earn some pocket money during this
    recession and run an easy to start and fun business,
    then you'll LOVE this guide.

    It contains all the information you need to start making
    money from the very first job...

    Check it out now as the offer ends in 2 days: ==> Diagrams which are detailed with a full set of dimensions

    ===============
    URGENT UPDATE:
    ===============

    I've been told by Jim that there's only *8* slots left
    for the free bonus and one-on-one coaching.

    Once he fill up these last 8 spots, I can assure you
    it will not be repeated.

    So I urge you to get the bonus and be among the 8 people: ==>Step -by-step instructions how to start your project

    Your Name

    P.S. P.S: My favorite section of the guide
    is where Jim gives you 10 of his TOP-
    SELLING wood crafts. This is really the
    "golden-goose" for woodworking businesses.

    Click here to visit his site now: ==> The necessary materials for that particular project

    ReplyDelete

Thank you for your comments! If you have a question and your blogger profile is NOT linked to your email address, then I'll answer your question here in the comment section. Thanks!